2011/04/01

Knights of Columbus Building (South Bend, Indiana)

Knights of Columbus-Indiana Club

Knights of Columbus-Indiana Club
U.S. National Register of Historic Places
Location: 320 W. Jefferson, South Bend, Indiana
Coordinates: 41°40′29″N 86°15′15″W / 41.67472°N 86.25417°WCoordinates: 41°40′29″N 86°15′15″W / 41.67472°N 86.25417°W
Area: less than one acre
Built: 1924
Architect: Nichol,Sholer & Hoffman
Architectural style(s): Renaissance, Italian Renaissance
Governing body: Private
MPS: Downtown South Bend Historic MRA
Added to NRHP: June 5, 1985
NRHP Reference#: 85001218

The Knights of Columbus-Indiana Club is a building built in 1924 in South Bend, Indiana. It was listed on the National Register of Historic Places in 1985.

It was covered in a multiple resource study of Downtown South Bend.

See also

References






Retrieved from : http://en.wikipedia.org/wiki/Knights_of_Columbus-Indiana_Club

Ford Ecostar

Ford Ecostar

The Ford Ecostar was an experimental electric car in the form of a small delivery van. A sodium-sulfur battery in the floor of the cargo area stored power for a 75 horsepower (56 kW) electric motor under the front hood. Just over 100 Ecostars were produced, and used in fleet tests between 1992 and 1996 with over 1,000,000 miles (1,609,344 km) driven. The Ecostar averaged 94 miles (151 km) on a full charge, and demonstrated 155 miles (249 km) miles range in one test. However, on several occasions the battery burst into flame during recharging. For this, and several other reasons, Ford lost interest in the sodium-sulfur battery and turned to fuel cell concepts instead. The Ecostar introduced the road-and-leaf logo now used on a number of Ford products.

The product niche appeared to be a useful one and has led to a number of similar designs. The Citroën Berlingo électrique was almost identical in looks, performance and range. Ford is re-entering the market as well, with an electric version of the Transit Connect.

History

Ford developed the sodium-sulfur battery technology in 1965, but had not developed it commercially. Development was later picked up in Europe.

The Ecostar was introduced as a purely experimental effort, to help develop all aspects of electric vehicle design from engineering to supplier development to market development. A "prototype-of-the-prototypes" was completed with lead acid batteries in 1992, and introduced with the comment that future models would include the new battery technology. Several similar models followed and were lent out for test drives with favorable results.

A total of 80 to 105 "production-prototype" sulfur-powered Ecostars were hand-built starting in 1993, and used in fleet trials with a number of customers starting the next year. At the time, the cost of the battery was a significant $46,000. However, the vehicles were hand-built at a cost of $250,000, so the battery cost was not representative of a production version.

The tests ran for 30 months. Throughout the tests there were problems with the system, including two vehicles that burst into flame while charging. The sulfur in the battery was flammable, a serious safety risk. ABB introduced a new version of the battery, but was unwilling to guarantee performance beyond one year.

In late 1997, Ford announced a partnership with Daimler-Benz and Ballard Power Systems to introduced car-ready fuel cells, and their experiments with the sodium-sulfur batteries ended.

Description

The Ecostar's chassis was based on the Escort Van produced by Ford's Halewood Body & Assembly factory outside Liverpool). This was essentially a European Escort Mk V with a raised cargo area forming a 2-door panel van. Fully equipped, it weighed 3,100 pounds (1,406 kg).

A significant portion of that weight was its 780 pounds (354 kg) sodium-sulfur battery, which stored 37 kWh. Using the Federal Urban Driving Schedule, this gave the Ecostar a range of 100 miles (161 km). The sodium-sulfur technology was invented by Ford in the 1960s, but the battery for the Ecostar was built by ABB Group in Heidelberg, Germany. In order for the battery to work, it had to be maintained at a temperature of 600 °F (316 °C), which keeps the sulfur molten.

To avoid heat loss, and to insulate the cabin from its heat, the battery was stored inside a double-walled stainless steel vacuum bottle. This allowed it to stay warm overnight, and keep its temperature constant even during cold weather, when traditional batteries are less responsive. The container was mounted below the floor plan of the cargo area, which gave the vehicle a low center of gravity that give it well-liked handling. One complaint, however, was the lack of power steering.

The battery powered a three-phase electric motor located under the hood in the area normally used for the gasoline engine. The motor delivered only 75 hp, low for a vehicle of this size, but up to 143 foot-pounds of torque, numbers typical of a much more powerful gasoline engine. This was better torque than the Ford Escort GT, for instance, whose 1.8 litre four-cylinder engine delivered 127 hp but only 114 ft-lb.

One drawback of the sodium-sulfur battery is its relatively slow discharge rates, which limited the amount of power that could be drawn from the battery during acceleration. Drivers described it as "sedate", while Ford estimated its 0-60 mph (0-100 km/h) acceleration at about 16.5 seconds. While slow by car standards, this is similar to other small European delivery vans of the era, like the Volkswagen Eurovan.

While cruising the motor used only 8 kW to maintain speed, about 6 horsepower (4 kW). This speaks to the motor-to-wheel efficiency of the electric drivetrain, as well as the 50 psi low-drag tires. However, the long quoted ranges referred only to driving, not accessory systems. These added considerably to the load; the electric heater burned 5 kW, and the air conditioner 6 kW. In real-world driving, using either would significantly impact range.

See also

References

Notes

Bibliography

Further reading






Retrieved from : http://en.wikipedia.org/wiki/Ford_Ecostar

Adobe Walls, Texas

Adobe Walls, Texas

Adobe Walls, Texas
U.S. National Register of Historic Places
Recorded Texas Historic Landmark
Location: Hutchinson County, Texas
Coordinates: 35°53′23″N 101°09′29″W / 35.88972°N 101.15806°WCoordinates: 35°53′23″N 101°09′29″W / 35.88972°N 101.15806°W
Governing body: Local government
Added to NRHP: May 22, 1978
Designated RTHL: 1979
NRHP Reference#: 78002958

Adobe Walls ia a ghost town in Hutchinson County, 17 miles northeast of Stinnett, in the U.S. state of Texas. It was established in 1843 as a trading post for buffalo hunters and local Indian trade in the vicinity of the Canadian River. It later became a ranching community. Historically, Adobe Walls is the site of two decisive battles between native Americans and Anglo forces. In the November of 1864 First Battle of Adobe Walls, native Americans successfully repelled attacking troops led by Kit Carson. Ten years later, on June 27, 1874, known as the Second Battle of Adobe Walls, civilians at the Adobe Walls trading post successfully repelled an attack by native Americans. The second battle led to a military campaign which resulted in the relocation of native Americans to Indian Territory in Oklahoma.

On May 22, 1978, the Adobe Walls site was added to the National Register of Historic Places in Texas, and in 1979 recognized as a Texas state archeological landmark.

Establishment

In 1843, the trading firm of Bent, St. Vrain and Company established a log structure trading site on what is now known as Bent Creek in Hutchinson County. In 1845, they replaced the log structure with an adobe brick eighty-square-foot single-entrance fort, with walls that rose nine feet. The fort was closed in 1848, due to Indian depredations. In 1849, William Bent found part of his livestock slaughtered by local Indians. He blew up the remains of the fort and departed the panhandle of Texas.

By the time of the renown battles, the adobe structure was permanently abandoned, leaving only the crumbling adobe walls. In 1874, a new complex was erected north of the ruins by traders from Kansas.

The battles of Adobe Walls

First battle

In November 1864, an estimated 3,000 Kiowa, Comanche and Plains Apache repelled an attacking 372 Army troops under Kit Carson in what became known as the First Battle of Adobe Walls.

Second battle

On June 27, 1874, known as the Second Battle of Adobe Walls, 28 trading post civilians repelled 700 attacking native Americans led by Isa-tai and Quanah Parker.

Post battle era

Following the battles and relocation of native American tribes, buffalo hunters would still come, but the herds had thinned. The Turkey Track Ranch was established, but the population of the area remained sparse. Human remains were left scattered on the battlefields.

In 1883, civilian Medal of Honor winner Billy Dixon hired on at the Turkey Track Ranch. He filed for two sections of land at Bent Creek and erected a log house. The first school building was destroyed by fire in 1920, and Dixon made his home available as a temporary school until a new one would be erected. Dixon was appointed the first postmaster when Adobe Walls received its post office on August 3, 1887. Dixon ran the post office out of his home, where he and business partner S.G. Carter also had a store. Dixon served as postmaster until 1901, at which time Otto Anderson was appointed postmaster. The post office was in operation until 1921, when it was closed and mail service moved to Plemons.

Adobe Walls was a polling site, and voting there in the 19th Century was a multi-day community event that included barbecue and accompaniments. Today, Adobe Wells is a ghost town.

In 1923 the Panhandle-Plains Historical Society became owners of the remains of the 1874 trading post, and conducted archeological excavations in the 1970s.

Notable persons

Additional sourcing

References






Retrieved from : http://en.wikipedia.org/wiki/Adobe_Walls,_Texas