Lycoming IO-720-A1A

Lycoming IO-720

IO-720
Type	Piston aero-engine
Manufacturer	Lycoming Engines
First run	1961
Major applications	Piper Comanche 400 Embraer EMB 202 Ipanema

The Lycoming IO-720 engine is a large displacement, horizontally opposed, eight-cylinder aircraft engine featuring four cylinders per side, manufactured by Lycoming Engines.

There is no carburetted version of the engine, which would have been designated O-720 and therefore the base model is the IO-720. The IO-720 and the Jabiru 5100 are the only flat-eight configuration aircraft engines currently in production.

Design and development

The engine has a fuel injection system which schedules fuel flow proportionally to the airflow, with fuel vaporization occurring at the intake ports. The engine has a displacement of 722 cubic inches (11.8 litres) and produces 400 hp (298 kW). The cylinders have air-cooled heads cast from aluminum alloy with a fully machined combustion chamber.

The first IO-720 was type certified on 25 October 1961 to the CAR 13 standard as amended to 15 June 1956 including 13-1, 13-2, 13-3, 13-4.

In 2009 a new IO-720-A1B cost US$113,621, with a rebuilt engine retailing for US$75,435 and a factory overhaul priced at US$66,289.

Variants

IO-720-A1A

Eight-cylinder, horizontally opposed, air-cooled direct drive, fuel injection, internal oil jet piston cooling, 722 cubic inches (11.8 litres), 400 hp (298 kW), certified 25 October 1961

IO-720-A1B

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -A1A except equipped with Bendix S8LN-1208 and S8LN-1209 magnetos, certified 22 February 1971

IO-720-A1BD

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -A1B except has a dual magneto, certified 30 December 1976

IO-720-B1A

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -A1A except for top exhaust cylinders and offset exhaust valve shroud tubes, certified 4 November 1965

IO-720-B1B

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -B1A except equipped with Bendix S8LN-1208 and S8LN-1209 magnetos and Bendix RSA-10ED1 fuel injection, certified 22 February 1971

IO-720-B1BD

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -B1B except has a dual magneto, certified 30 December 1976

IO-720-C1B

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -A1B except that it has up-exhaust cylinder heads, certified 22 December 1971

IO-720-C1BD

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -C1B except has a dual magneto, certified 28 January 1977

IO-720-D1B

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -A1B except has a rear type air inlet housing instead of a front inlet, certified 29 October 1973

IO-720-D1BD

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -D1B except has a dual magneto, certified 28 January 1977

IO-720-D1C

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -D1B except equipped with an angled fuel injector adapter, certified 15 April 1982

IO-720-D1CD

fuel-injected, 722 cubic inches (11.8 litres), 400 hp (298 kW), same as -D1C except has a dual magneto, certified 10 June 1977

Applications

IO-720-A1A

Specifications (IO-720A)

Data from Lycoming Specialty Datasheet and TYPE CERTIFICATE DATA SHEET NO. 1E15, Revision 6

General characteristics

See also

References

Retrieved from : http://en.wikipedia.org/w/index.php?title=Lycoming_IO-720&oldid=459248264